[vc_row full_width=”stretch_row” css=”.vc_custom_1567034945495{margin-top: -60px !important;padding-top: 10% !important;padding-bottom: 10% !important;background-image: url(https://duromount.com/wp-content/uploads/2019/06/Section_BG_01.jpg?id=1277) !important;background-position: center !important;background-repeat: no-repeat !important;background-size: cover !important;}”][vc_column][vc_row_inner][vc_column_inner][vc_column_text]

Install Guides

[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_column][/vc_row][vc_section][vc_row][vc_column][vc_column_text]

Rear Bump Stops Install: 3rd Gen 4Runner

[/vc_column_text][vc_row_inner][vc_column_inner width=”1/3″][vc_column_text][/vc_column_text][/vc_column_inner][vc_column_inner width=”2/3″][vc_column_text]

Step 1. Remove Front Wheels

To begin, pre-soak your old OEM bump stops with Liquid Wrench for easier removal. Then, remove the rear wheels from your truck using jack stands.[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/3″][vc_column_text][/vc_column_text][/vc_column_inner][vc_column_inner width=”2/3″][vc_column_text]

Step 2. Remove Old OEM Bump Stops

Remove OEM bump stop using a 12mm socket.[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/3″][vc_column_text][/vc_column_text][/vc_column_inner][vc_column_inner width=”2/3″][vc_column_text]

Step 3. Drop Flange Bolt into Front Bump Stops

Drop the flange bolt into your new DuroBumps bump stops and coat the threads with the provided single-use medium (blue) thread locker.[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/3″][vc_column_text][/vc_column_text][/vc_column_inner][vc_column_inner width=”2/3″][vc_column_text]

Step 4. Install DuroBumps

Install the new rear DuroBump into the same location the OEM bump stop was removed using a 12mm socket with 3″ extension. Tighten flange bolts until snug, approximately (≈ 15 – 18ft⋅lbs).[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/3″][vc_column_text][/vc_column_text][/vc_column_inner][vc_column_inner width=”2/3″][vc_column_text]

Step 5. Reinstall Wheels

Re-install wheel and tighten the lug nuts to 83ft⋅lbs. Repeat steps 1 – 5 on the other side.[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_column][/vc_row][/vc_section]